Analogue audio intercom. Suitable for 4+1 audio only systems with electronic call. Complete with 2 buttons, extendable up to 10 for door-lock release, intercommunicating calls and other services. For the additional buttons use the PT501G article.
Telephone PABX with 2 trunk lines and 8 internal lines. Suitable for all types of telephones. With specific interfaces, the connection with intercom and the ID caller function are available. This PABX defines the connected terminal status: programming the telephones in different telephone and intercom operating modes, setting distinctive ringing, associating a direct internal number with each telephone set (DISA function), defining a terminal as ""fax"", follow me, call capture, 3-party conference. Two different general modes can be programmed (e.g. day and night). Provided with intercom interface for 4+1 audio systems. ID caller for all the users available. ""Call diversion"" function from intercom to external line. Other features: electrical power failure running, room monitor, activation of electrical equipment from remote telephone. Expandable through ES14E board. Intercom interface allows the connection to 4+1 and 1+1 systems.
Product available until stock lasts.
Basic intercom of Project series. Complete with door-lock release button, spiral cord, electronic microphone. Suitable for 4+1 intercom systems with alternate current call and electronic call. Also suitable for FN4000 digital systems.
Basic intercom with door-lock release button, spiral cord. For 4+1 intercom systems with electronic call.
Extendable intercom, for additional or intercommunicating functions. Suitable for 4+1 intercom with alternate current call systems and for digital FN4000 system. Complete with electronic microphone, buzzer, spiral cord and 2 buttons expandable to 10 for door-lock release, intercommunicating calls and various services. Out of production.
Extendable intercom for additional or intercommunicating functions. Complete with 2 buttons, extandable to 10 for door-lock release, intercommunicating calls and various services. For intercom 4+1 systems with electronic call. Available until stock lasts.
Riser or block separator. It allows the mangement of independent sections inside an installation, allowing to have local services availble, such as the call from a secondary door panel or intercommunicating, without engaging the main building line. It is a mandary item in all system with more than 200 internal units (extended range DUO systems). Dimensions: 3 DIN A modules.
One-way colour videokit ready and complete for the installation. Duo Easy technology. Composed by ZHeroS ZH1252W monitor, outdoor panel Alba serie CV2124AB with 1 call button together with 2221MQ power supply. Out of production.
Door station on IP technology. Additional module of Agorà series. It is an expansion element with 8 buttons to be installed and connected to IPV11AGLS or IPV12AGLS. It is possible to install up to 16 expansion modules, for a total capacity of 130 calls. To be completed with a suitable number of AGL20 or AGL21 according to the required configuration.
IpWay Agorà door station. It allows to build up video intercom systems over IP networks with a wide range of uses and integrations with VoIP PBX (SIP). Equipped with a wide angle camera (110°), expandable up to 130 call buttons (through installation of IPT08AGLS module) and up to 5 users for each call both as group or in sequence. Dual input for door sensor status, 2 built-in relay outputs and management of up to 2 remote web relays. Missed call notification via e-mail with attached pictures. PoE or 12Vac/dc power supply.
Out of production
